Combined 7(a) and 504 Financing After July 4, 2026: How a Project Reaches $10 Million

    By David Jones, MAI, CCIM. Published November 20, 2026.

    The short answer

    Since July 4, 2026 a borrower's 7(a) loan no longer uses up room under the 504 limit. A business that secures a 7(a) loan first can take up to $5 million through 7(a) and up to $5 million through 504. That is how a project reaches the $10 million of SBA-backed financing that SBA announced.

    The change is narrower than the headline. It changed how two limits interact. It did not change the limit of either program, the guaranty cap, the equity rules or the credit standards. A combined deal still has to pass two underwritings, and its cash flow has to carry all of the debt. This post sets out exactly what the policy says, what it leaves alone, and what a feasibility study for a combined structure needs to show.

    What Policy Notice 5000-879058 changed

    The document is SBA Policy Notice 5000-879058, "Coordination of 7(a) and 504 for Maximum Loan Limits". It was published May 18, 2026 and took effect July 4, 2026. Its operative sentence is this: "a borrower's outstanding loan balance under the 7(a) loan program, up to an including the maximum loan limit, does not reduce the maximum loan amount available under the 504 loan program".

    The clearest way to see the change is to read the 504 debenture limit in the old and the new SOP side by side. SOP 50 10 8.1, which took effect October 1, 2026, integrated the notice.

    Text of the 504 debenture limit (Section C, Chapter 1, Debenture Limits)
    SOP 50 10 8 (effective June 1, 2025)"In addition, in calculating this limit, SBA loan guaranties, committed or outstanding, that the Applicant and its affiliates have received through the 504 or 7(a) (including Community Advantage) loan programs must be included."
    SOP 50 10 8.1 (effective October 1, 2026)"To calculate this limit, include only all SBA 504 loans, committed or outstanding, that the Applicant and its affiliates have received."

    Under the old text, a 7(a) guaranty counted against the 504 ceiling. Under the new text, only 504 loans count. A business with a 7(a) loan, existing or concurrent, now has its full 504 room.

    Where the $10 million figure comes from

    The policy notice never states "$10 million". The notice states the mechanism. The figure comes from two SBA press releases.

    The release of May 18, 2026, "SBA Doubles Cumulative 7(a) and 504 Loan Limit to $10 Million", says that "qualified borrowers who secure a 7(a) loan first may access up to $5 million through the 7(a) loan program and up to $5 million through the 504 loan program, for a combined total of $10 million". The release of July 7, 2026 confirms that the policy went into effect on July 4 and that the combined limit rose from the previous $5 million: "SBA borrowers may now combine their 7(a) and 504 loans for up to $10 million in SBA-backed financing".

    Anyone quoting the figure should quote its conditions with it.

    The conditions

    The 7(a) loan is approved first

    SOP 50 10 8.1, Appendix 16 (7(a) Maximum Guaranty Amounts and Percentages), under "Combination of 7(a) and 504 loans", says: "Due to statutory requirements, the 7(a) loan should be processed and approved first." The prior SOP gave a different reason for the same order: "Because the 7(a) loan has a lower maximum guaranteed amount, the 7(a) loan should be processed and approved first."

    The same paragraph of 8.1 still warns that "the order in which the loans are approved determines the maximum loan and guaranty amount available". In practice the lender approves the 7(a) loan first and the CDC approves the 504 second, and lenders must tell the processing centers that there is a companion 504 application. The order is a term of the structure, and the timeline in a study should reflect it.

    Each program keeps its own limit

    The 7(a) side is unchanged: "The maximum loan amount for any one Standard 7(a) loan is $5,000,000." (Section B, Chapter 1, Paragraph B).

    The 504 side is still governed by the debenture rule in Section C, Chapter 1, Paragraph D.1: "the gross debenture is limited to an outstanding maximum balance of $5,000,000 in the aggregate for each small business concern, including its affiliates". Two groups have a higher figure: "$5,500,000 maximum for each eligible project" for small manufacturers (primary NAICS code in Sectors 31, 32 and 33, with all production facilities in the United States) and for Eligible Energy Public Policy Projects. For those borrowers the SBA-backed total can be higher than $10 million.

    Note what the 504 limit measures. It caps the debenture, which is the SBA-backed part of a 504 project. The third party lender's first lien loan sits in front of the debenture and is not counted in it. The total cost of a 504 project is therefore larger than its debenture.

    The guaranty cap of $3,750,000 still stands

    The policy notice restates the statutory limits in its background section, including this one: "the total outstanding SBA-guaranteed balance across all SBA loan programs to a single borrower (including affiliates) may not exceed $3,750,000". (The notice gives $4,500,000 for qualifying export loans.) SOP 50 10 8.1, Appendix 16, repeats the figure: "The maximum guaranty amount is $3,750,000." The guaranty percentage is unchanged as well: 75% for loans over $150,000.

    The notice did not raise or remove that cap. It changed which balances reduce the 504 maximum. The $3,750,000 figure remains in the SOP, beside the sentence that ties the available loan and guaranty amounts to the order of approval. A study does not decide how the cap applies. Its sources and uses should be built on the structure the lender and the CDC have agreed.

    What the combined structure means for equity

    The notice did not touch equity. Each loan brings its own rule, and a combined deal has to satisfy both.

    On the 504 side the borrower's contribution depends on the business and the property (Section C, Chapter 1, Paragraph E):

    504 projectBorrower's contributionDebenture
    StandardAt least 10%Up to 40%
    New business (in operation 2 years or less)At least 15%No more than 35%
    Limited or special purpose propertyAt least 15%No more than 35%
    New business and limited or special purpose propertyAt least 20%No more than 30%

    The SOP's words for the last row: "If a Project will finance both a New Business and a Limited or Special Purpose Property, the Applicant must contribute at least 20% of the Project cost." Hotels, car washes, gas stations and assisted living facilities are all on the SOP's list of limited or special purpose properties. Many of the larger projects that a combined structure is meant for fall in the 15% or 20% rows. The third party loan must also be at least 50% of project costs where the borrower has operated for 2 years or less or the property is a limited or single purpose asset.

    As an illustration, a $6,000,000 project for a new business on a special purpose property is financed with a $3,000,000 first lien (50%), a $1,800,000 debenture (30%) and a $1,200,000 borrower contribution (20%). The same project for an existing business on a general purpose property would carry a $2,400,000 debenture and a $600,000 contribution.

    On the 7(a) side, a start-up needs equity under Section B, Chapter 1, Paragraph C: "All 7(a) loans made to a Start-Up Business require a 10% equity injection based on the project cost". The SOP defines total project costs for that test as "all costs required to become operational, regardless of the source of funds, except for lines of credit and 504 loans". A 7(a) loan that finances a change of ownership follows Appendix 15, where the equity injection is 10% by transaction type and, for an initial acquisition, "cannot be reduced or eliminated."

    A second loan is more debt. It is not equity. A lender and a CDC will each ask where the borrower's cash comes from, and the 504 rule allows a borrowed contribution only "as long as it is subordinate to the Third Party Loan and the 504 debenture". The study should trace every equity dollar to its source and show that the same dollar is not counted twice.

    DSCR on all business debt

    This is the part of a combined deal that decides most credit decisions. More SBA-backed debt is available. The cash flow to carry it is not created by the notice.

    Both programs test the debt service coverage ratio (DSCR) against total debt, not against their own loan alone. The 7(a) rule (Section B, Chapter 1, Paragraph C) reads: "Debt Service (DS) is defined as the future required principal and interest payments on all business debt inclusive of new SBA loan proceeds. The Applicant’s debt service coverage ratio (DSC) must be equal to or greater than 1.15 on a historical and/or projected cash flow basis and 1:1 on a global basis."

    The 504 rule (Section C, Chapter 1, Paragraph E) reads: "The DSC ratio must be equal to or greater than 1.15:1." It is calculated on a historical basis, the CDC must prepare a global cash flow, and "CDCs must assume interest-only payments on fully drawn lines of credit for this calculation." Where history falls short, "the analysis must include a minimum of 2 years of projections." For a 7(a) start-up or other projection-based application, the projections must reach 1.15 "within 2 years from loan funding or, for construction projects, within 2 years from the end of construction."

    In a combined deal the debt service in each of those tests includes the 7(a) loan, the third party first lien and the debenture. Two illustrations show the scale (rates are illustrations only). A $2,000,000 7(a) loan at 10.5% fixed over 25 years has annual debt service of $226,604 and needs cash flow of $260,594 for coverage of 1.15. The $6,000,000 504 project above, with both liens, has annual debt service of $485,750 and needs $558,613 for coverage of 1.15. A borrower who carries both carries both payments, and the projection has to cover them together. Lenders and CDCs may also set a higher DSCR in their own credit policy.

    Which project types already use each program

    SBA's loan data shows how the 20 project types this site covers have split between 7(a) and 504 for FY2010 to FY2026 approvals.

    Project type7(a) loans504 loans504 share of loans504 share of dollarsAverage 7(a) loanAverage 504 loan
    Manufacturing (all)58,46611,04315.9%24.7%$561,285$975,487
    Restaurants (full and limited service)56,4255,7419.2%13.8%$442,857$695,020
    Physician offices and outpatient care centers (NAICS 6211 and 6214)13,8843,18518.7%24.7%$494,403$708,164
    Hotels and motels12,8894,12624.2%21.5%$2.2 million$1.9 million
    Child care centers10,4722,38018.5%19.4%$788,030$833,421
    Gas stations and fuel-convenience stores9,2941,29212.2%8.6%$1.2 million$814,708
    Food manufacturing (excluding meat)7,70398711.4%27.1%$415,964$1.2 million
    Grocery stores5,44268911.2%16.7%$656,196$1.0 million
    Car washes3,7201,25925.3%19.7%$1.3 million$917,755
    Assisted living and nursing facilities3,5711,00221.9%23.6%$1.1 million$1.2 million
    Breweries and distilleries (wineries excluded, NAICS 312130)3,82564514.4%23.8%$471,753$873,746
    Event venues (proxy: promoters with facilities and caterers, NAICS 711310 and 722320)3,36943611.5%21.3%$423,952$886,892
    Self-storage facilities1,9541,03834.7%27.6%$1.4 million$977,089
    Coin-operated laundries and drycleaners2,6472859.7%8.2%$616,698$511,144
    Wood product manufacturing2,27138814.6%21.7%$605,737$984,626
    RV parks and campgrounds97837427.7%22.2%$1.0 million$764,698
    Meat and poultry processing49810817.8%29.4%$600,947$1.2 million
    Marinas3358820.8%20.9%$992,565$997,648
    Solar and other renewable power generation1983113.5%19.1%$473,045$714,677
    Refrigerated warehousing764939.2%54.0%$1.3 million$2.3 million

    Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 September 2026 (project state; disbursed loans only). Computed by the firm. FY2010 to FY2026 approvals. 504 amounts are the SBA 504 loan amounts in SBA's 504 file (the CDC portion of each project); the bank's first mortgage and the borrower's contribution are not in them.

    Two cautions before reading it. The 504 figures are the CDC portion of each project only, so a 504 project is larger than its 504 loan. And the data runs to 30 September 2026, less than three months after the new rule took effect. The table does not identify projects that used both programs, and it cannot yet show what the rule has done.

    What it does show is where 504 was already common. The 504 share of loans is highest in refrigerated warehousing (39.2%), self-storage (34.7%), RV parks and campgrounds (27.7%), car washes (25.3%) and hotels and motels (24.2%). These are real estate projects, and several are special purpose properties. The share is lowest in restaurants (9.2%) and coin-operated laundries and drycleaners (9.7%).

    Loan size points the same way. The average 7(a) loan for hotels and motels is $2.2 million, the highest 7(a) average in the table, and the average hotel 504 loan is $1.9 million. The average 504 loan in refrigerated warehousing is $2.3 million, the highest 504 average. Projects of this kind are the ones most likely to press against a single program's ceiling, and so the ones for which the combined structure matters. Most projects in the table are far below either limit and will never need it. The full figures are on SBA lending by project type, and the two programs are compared rule by rule on 7(a) vs 504 feasibility studies.

    What a feasibility study needs to show for a combined deal

    The SOP has no requirement that a 7(a) loan carry a feasibility study, and no blanket requirement for 504. For 504, Section C, Chapter 1, Paragraph E says: "SBA has the regulatory authority to request a feasibility study when it is needed to further understand the small business type and market conditions at the project location." Two of its five listed triggers describe large combined projects well: "Highly specialized Project property;" and "Project size disproportionate to size of community it will serve; or". The same paragraph notes that "Reports prepared independently of the small business may be beneficial in mitigating any weaknesses identified in the credit analysis." Lenders and CDCs order studies under their own credit policy, and a project with two SBA loans and two reviewers is a natural case.

    For a combined structure, we would expect a study to do the following.

    One study, scoped at the start for both the lender and the CDC, avoids two documents with different assumptions. Our approach to the ratio is on financial projections and DSCR, the document list is on the feasibility study checklist, and the program pages cover 7(a) feasibility studies and 504 feasibility studies. The SOP provisions quoted here are collected on our SOP 50 10 8.1 page. The firm's work as SBA feasibility study consultants is described on the homepage.

    Sources

    1) U.S. Small Business Administration, Policy Notice 5000-879058, "Coordination of 7(a) and 504 for Maximum Loan Limits", published May 18, 2026, effective July 4, 2026. https://legacy.sba.gov/document/policy-notice-5000-879058-coordination-7a-504-maximum-loan-limits

    2) U.S. Small Business Administration, SOP 50 10 8.1, "Lender and Development Company Loan Programs", published September 25, 2026, effective October 1, 2026. https://legacy.sba.gov/document/sop-50-10-lender-development-company-loan-programs

    3) U.S. Small Business Administration, SOP 50 10 8, "Lender and Development Company Loan Programs", effective June 1, 2025. https://legacy.sba.gov/document/sop-50-10-lender-development-company-loan-programs

    4) U.S. Small Business Administration, press release, "SBA Doubles Cumulative 7(a) and 504 Loan Limit to $10 Million", May 18, 2026. https://legacy.sba.gov/article/2026/05/18/sba-doubles-cumulative-7a-504-loan-limit-10-million

    5) U.S. Small Business Administration, press release, "Small Businesses Now Eligible for $10 Million in SBA Financing", July 7, 2026. https://legacy.sba.gov/article/2026/07/07/small-businesses-now-eligible-10-million-sba-financing

    6) U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 September 2026 (project state; disbursed loans only). Computed by the firm.

    Questions

    Can a business now get $10 million in SBA loans?

    Yes, with conditions. Since July 4, 2026 a borrower who secures a 7(a) loan first may access up to $5 million through 7(a) and up to $5 million through 504, for a combined total of $10 million. Those words come from an SBA press release. Each loan is still underwritten separately, each program keeps its own limit, the 7(a) loan should be approved first, and the cash flow of the business has to cover the debt service on all of the debt.

    What exactly did Policy Notice 5000-879058 change?

    It changed how the 7(a) and 504 limits interact. The notice says a borrower's outstanding 7(a) balance, up to the maximum loan limit, does not reduce the maximum loan amount available under the 504 program. Before, SBA guaranties received through 7(a) had to be included when calculating the 504 debenture limit. Now only 504 loans count toward it. The notice was published May 18, 2026, took effect July 4, 2026, and was integrated into SOP 50 10 8.1.

    Does the policy notice itself say $10 million?

    No. The notice states the mechanism: a 7(a) balance no longer reduces the 504 maximum. The $10 million figure appears in two SBA press releases, dated May 18, 2026 and July 7, 2026. It is the sum of up to $5 million of 7(a) and up to $5 million of 504 for a borrower who secures the 7(a) loan first. Small manufacturers and eligible energy projects have a 504 debenture limit of $5,500,000 per eligible project.

    Which loan has to be approved first, the 7(a) or the 504?

    The 7(a) loan. SOP 50 10 8.1, Appendix 16, says that due to statutory requirements the 7(a) loan should be processed and approved first, and that the order in which the loans are approved determines the maximum loan and guaranty amount available. Lenders must also tell the SBA processing centers that there is a companion 504 application. A feasibility study for a combined deal should show a timeline that follows that order.

    Did the SBA guaranty cap of $3,750,000 change?

    No. The policy notice restates that the total outstanding SBA-guaranteed balance across all SBA loan programs to a single borrower, including affiliates, may not exceed $3,750,000. SOP 50 10 8.1, Appendix 16, also gives $3,750,000 as the maximum guaranty amount, with a guaranty percentage of 75% for loans over $150,000. The notice changed which balances reduce the 504 maximum. It did not raise the guaranty cap, and the lender works out the structure with SBA.

    How much equity does a combined 7(a) and 504 project need?

    The notice did not change equity, so each loan applies its own rule. A 504 borrower contributes at least 10%, at least 15% for a new business or a limited or special purpose property, and at least 20% where both apply. A 7(a) loan to a start-up requires a 10% equity injection based on the project cost, and a 7(a) change of ownership follows the Appendix 15 rules. A second loan is debt, not equity, and reviewers will trace every equity dollar to its source.

    How is debt service coverage tested when a project has both loans?

    On all of the debt. The 7(a) rule defines debt service as the future required principal and interest payments on all business debt inclusive of new SBA loan proceeds, and requires a ratio of at least 1.15, with 1:1 on a global basis. The 504 rule requires at least 1.15:1 and a global cash flow. In a combined deal the payments on the 7(a) loan, the third party first lien and the debenture are all in the calculation.

    Does a combined 7(a) and 504 deal require a feasibility study?

    The SOP has no requirement that a 7(a) loan carry a feasibility study and no blanket requirement for 504. For 504, SBA has authority to request one and lists five things that may cause a request, including a highly specialized project property and a project size disproportionate to the size of the community it will serve. Lenders and CDCs order studies under their own credit policy, and may do so for a large project with two SBA loans and two reviewers.